HQ7C2SHPHPHP-HQ7C2S1.0<h5>By the end of the course, you should be able to: </h5><ul> <li>Introduce you to HPE Comware networking protocols and configuration</li><li>Prepare you to configure and manage HPE Comware devices</li><li>Protect devices with local and remote authentication using telnet, SSH, web, and SNMP access</li><li>Navigate the HPE Comware CLI and manage the flash file system</li><li>Upgrade the HPE Comware switch operating system</li><li>Configure VLANs on HPE Comware switches</li><li>Implement basic routing on directly connected VLANs or links</li><li>Configure a HPE Comware switch for DHCP server and DHCP relay</li><li>Interpret HPE Comware logs</li><li>Differentiate between static and dynamic link aggregation</li><li>Configure and troubleshoot link aggregation on HPE switches</li><li>Configure Distributed Resilient Network Interconnect (DRNI)</li><li>Identify applications for static and dynamic routing</li><li>Configure single-area OSPF routing</li><li>Configure Access Control Lists (ACLs)</li><li>Configure Quality of Service (QoS)</li><li>Understand the basic operation of HPE Intelligent Resilient Framework (IRF)</li><li>Identify HPE Intelligent Resilient Framework advantages when compared with other technologies that manage redundant paths</li><li>Describe how the multi-active detection (MAD) protocol deals with an HPE Intelligent Resilient Framework spit stack</li><li>Configure and verify a simple HPE Intelligent Resilient Framework topology</li><li>Identify an appropriate VLAN design based on a given scenario</li><li>Based on a given scenario, choose appropriate link types and redundancy solutions</li><li>Use best practices for IP addressing and OSPF routing when implementing a network design</li></ul><h5>This course is intended for: </h5><ul> <li>Network or systems administrators</li><li>Network engineers</li><li>Consultants who plan to deploy HPE Comware switches into a new or existing network</li></ul><h5>Module 1: Introduction </h5><ul> <li>Introduce HPE Comware networking protocols and configuration</li><li>Prepare you to configure and manage HPE Comware devices</li></ul><h5>Module 2: Basic Setup</h5> <ul> <li>Initiate a console connection to an HPE Comware switch</li><li>Describe characteristics and purpose of each privilege level</li><li>Navigate the HPE Comware CLI</li><li>Perform basic configuration</li><li>Configure interfaces</li><li>Troubleshoot common problems with basic connectivity</li></ul><h5>Module 3: Protecting Management Access </h5><ul> <li>Apply password protection to local and remote authentication</li><li>Associate user roles with password and scheme authentication</li><li>Implement remote management with SSH, Telnet, and SNMP access</li></ul><h5>Module 4: Managing Software and Configurations </h5><ul> <li>Understand the boot up process of HPE Comware switches</li><li>Understand how to use the flash file system on HPE Comware switches</li><li>Upgrade operating systems on HPE Comware switches</li><li>Manage configuration files on HPE Comware switches</li></ul><h5>Module 5: VLANs </h5><ul> <li>Understand the use of VLANs and the various types of VLANs</li><li>Choose the correct VLAN port type for various situations</li><li>Configure VLANs and assign IP addresses to VLAN interfaces</li><li>Implement basic routing on directly connected VLANs</li><li>Verify connectivity within and between VLANs</li></ul><h5>Module 6: IP Services </h5><ul> <li>After completing this module, you should be able to configure the following services &ndash;DHCP server and DHCP relay &ndash;NTP &ndash;Logging &ndash;DNS</li></ul><h5>Module 7: Link Aggregation </h5><ul> <li>Introduction to link aggregation</li><li>Compare and contrast the different link aggregation types</li><li>Understand how the link aggregation control protocol works (LACP)</li><li>Configure and verify link aggregation on HPE Comware switches</li></ul><h5>Module 8: DRNI - Distributed Resilient Network Interconnect </h5><ul> <li>Describe DRNI features &bull; Understand DRNI basic operations</li><li>Understand the basic configuration of a DRNI system</li><li>Configure and verify DRNI on HPE Comware switches</li></ul><h5>Module 9: IP Routing </h5><ul> <li>Describe how HPE Comware switches route traffic between directly networks</li><li>Describe the operation of static routes and configure static routes</li><li>Describe the basic operation of OSPF and configure single-area OSPF</li></ul><h5>Module 10: ACLs - Access Control Lists </h5><ul> <li>Define ACLs and identify the criteria by which ACLs select traffic</li><li>Configure ACLs on HPE Comware based switches to select given traffic</li><li>Apply static ACLs to interfaces to meet the needs of a particular scenario</li><li>Examine an ACL configuration and determine the action taken on specific packets</li></ul><h5>Module 11: QoS - Quality of Service </h5><ul> <li>Configure HPE Comware switches to honor the appropriate QoS marks applied by other devices</li><li>Create a QoS policy that assigns a specified class of traffic to a priority queue</li><li>Select and implement an appropriate strategy for queue scheduling</li><li>Implement traffic policing policies that enforce the negotiated committed information rate (CIR), committed burst size (CBS), peak information rate (PIR), and excessive burst size (EBS) for a specified class of traffic</li><li>Respond to congestion in advance by applying the appropriate traffic shaping and weighted random early detection (WRED) policies</li><li>Determine the QoS mark that an HPE Comware switch will assign to specific traffic and, if necessary, adjust the mark</li></ul><h5>Module 12: HPE Intelligent Resilient Framework (IRF) </h5><ul> <li>Understand the technologies and concepts involving HPE Intelligent Resilient Framework</li><li>Understand the advantages that HPE Intelligent Resilient Framework provides</li><li>Describe an HPE Intelligent Resilient Framework split fabric and how the multi-active detection (MAD) protocol deals with this problem</li><li>Configure a simple HPE Intelligent Resilient Framework topology</li><li>Verify and troubleshoot an HPE Intelligent Resilient Framework topology</li></ul>By the end of the course, you should be able to: - Introduce you to HPE Comware networking protocols and configuration - Prepare you to configure and manage HPE Comware devices - Protect devices with local and remote authentication using telnet, SSH, web, and SNMP access - Navigate the HPE Comware CLI and manage the flash file system - Upgrade the HPE Comware switch operating system - Configure VLANs on HPE Comware switches - Implement basic routing on directly connected VLANs or links - Configure a HPE Comware switch for DHCP server and DHCP relay - Interpret HPE Comware logs - Differentiate between static and dynamic link aggregation - Configure and troubleshoot link aggregation on HPE switches - Configure Distributed Resilient Network Interconnect (DRNI) - Identify applications for static and dynamic routing - Configure single-area OSPF routing - Configure Access Control Lists (ACLs) - Configure Quality of Service (QoS) - Understand the basic operation of HPE Intelligent Resilient Framework (IRF) - Identify HPE Intelligent Resilient Framework advantages when compared with other technologies that manage redundant paths - Describe how the multi-active detection (MAD) protocol deals with an HPE Intelligent Resilient Framework spit stack - Configure and verify a simple HPE Intelligent Resilient Framework topology - Identify an appropriate VLAN design based on a given scenario - Based on a given scenario, choose appropriate link types and redundancy solutions - Use best practices for IP addressing and OSPF routing when implementing a network designThis course is intended for: - Network or systems administrators - Network engineers - Consultants who plan to deploy HPE Comware switches into a new or existing networkModule 1: Introduction - Introduce HPE Comware networking protocols and configuration - Prepare you to configure and manage HPE Comware devices Module 2: Basic Setup - Initiate a console connection to an HPE Comware switch - Describe characteristics and purpose of each privilege level - Navigate the HPE Comware CLI - Perform basic configuration - Configure interfaces - Troubleshoot common problems with basic connectivity Module 3: Protecting Management Access - Apply password protection to local and remote authentication - Associate user roles with password and scheme authentication - Implement remote management with SSH, Telnet, and SNMP access Module 4: Managing Software and Configurations - Understand the boot up process of HPE Comware switches - Understand how to use the flash file system on HPE Comware switches - Upgrade operating systems on HPE Comware switches - Manage configuration files on HPE Comware switches Module 5: VLANs - Understand the use of VLANs and the various types of VLANs - Choose the correct VLAN port type for various situations - Configure VLANs and assign IP addresses to VLAN interfaces - Implement basic routing on directly connected VLANs - Verify connectivity within and between VLANs Module 6: IP Services - After completing this module, you should be able to configure the following services –DHCP server and DHCP relay –NTP –Logging –DNS Module 7: Link Aggregation - Introduction to link aggregation - Compare and contrast the different link aggregation types - Understand how the link aggregation control protocol works (LACP) - Configure and verify link aggregation on HPE Comware switches Module 8: DRNI - Distributed Resilient Network Interconnect - Describe DRNI features • Understand DRNI basic operations - Understand the basic configuration of a DRNI system - Configure and verify DRNI on HPE Comware switches Module 9: IP Routing - Describe how HPE Comware switches route traffic between directly networks - Describe the operation of static routes and configure static routes - Describe the basic operation of OSPF and configure single-area OSPF Module 10: ACLs - Access Control Lists - Define ACLs and identify the criteria by which ACLs select traffic - Configure ACLs on HPE Comware based switches to select given traffic - Apply static ACLs to interfaces to meet the needs of a particular scenario - Examine an ACL configuration and determine the action taken on specific packets Module 11: QoS - Quality of Service - Configure HPE Comware switches to honor the appropriate QoS marks applied by other devices - Create a QoS policy that assigns a specified class of traffic to a priority queue - Select and implement an appropriate strategy for queue scheduling - Implement traffic policing policies that enforce the negotiated committed information rate (CIR), committed burst size (CBS), peak information rate (PIR), and excessive burst size (EBS) for a specified class of traffic - Respond to congestion in advance by applying the appropriate traffic shaping and weighted random early detection (WRED) policies - Determine the QoS mark that an HPE Comware switch will assign to specific traffic and, if necessary, adjust the mark Module 12: HPE Intelligent Resilient Framework (IRF) - Understand the technologies and concepts involving HPE Intelligent Resilient Framework - Understand the advantages that HPE Intelligent Resilient Framework provides - Describe an HPE Intelligent Resilient Framework split fabric and how the multi-active detection (MAD) protocol deals with this problem - Configure a simple HPE Intelligent Resilient Framework topology - Verify and troubleshoot an HPE Intelligent Resilient Framework topology3 jours2250.002700.002250.00